BONDERITE TURCO C-SO IND 79 AERO 19.5 KGS

PRODUCT DESCRIPTION BONDERITE C-SO IND 79 AERO provides the following product characteristics: Technology Metal Pre-Treatment Product Type Solvent Cleaner Application Manual BONDERITE C-SO IND 79 AERO is a fast drying, safety solvent used as a cleaner for mechanical parts. BONDERITE C-SO IND 79 AERO is an light yellow clear liquid, which dries quickly and will not leave any residue on the cleaned parts. BONDERITE C-SO IND 79 AERO is very suitable for garages and repair shops, since it is safe on all metals, rubber, plastics and good quality paints. It contains no chlorinated solvents, so it can also be used on titanium or titanium-alloy. TECHNICAL DATA Appearance clear colourless Density, g/ml 0.776 to 0.796 DIRECTION OF USE Preliminary Statement Prior to use it is necessary to read the Material Safety Data Sheet for information about precautionary measures and safety recommendations. Also, for chemical products exempt from compulsory labeling, the relevant precautions should always be observed. Please also refer to the local safety instructions and contact Henkel for analytical support. Use instructions BONDERITE C-SO IND 79 AERO is normally used as received by a spray-unit or by means of brush. However, since it is lighter than water, it can also be effectively used as an immersion cleaner by floating it on a water bath. When used in this ways, BONDERITE C-SO IND 79 AERO is self filtering. The soil settles to the bottom. For the best performance the water should be discarded and replaced periodically. Immersion tanks should be covered when not in use to avoid evaporation.